Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Testing and Replacing the Fuel Pump on a Citroen Xsara

Model: Citroen Xsara MK 1 - Years 1997-2006
Part: Fuel pump

In this video tutorial, you will learn how to test the operation and how to remove and replace the fuel pump on a Citroen Xsara, following these simple steps. Start by removing the rear seat. Then remove the cover and disconnect the fuel hoses and the electrical connector of the fuel level sensor; now unscrew the retaining ring using a puller, as shown in the video. At this point, you can replace it with a new one!

Updated on 23 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where are the fuses of the Citroën Xsara located?
Citroen Xsara (1997-2006 / MK 1) Each fuse of the Citroën Xsara is located inside one of the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it is p…
Removing the Spark Plugs on Citroen Xsara
Removing the Spark Plugs on Citroen Xsara
Citroen Xsara (1997-2006 / MK 1) Replace the spark plugs on your Citroen Xsara by following these steps. Lift the front bonnet and secure it, then disconnect the battery terminals. R…
How to Remove the Radio from a Citroen Xsara
How to Remove the Radio from a Citroen Xsara
Citroen Xsara (1997-2006 / MK 1) Want to replace the original radio in your Citroen Xsara? Here’s how to do it. Use a screwdriver to remove the stereo from your car. Remove the cover…

Other guides you may be interested in

    Frequently Asked Questions

    • Xsara 1997-2006 - Where is the fuel pump located in a Citroen Xsara 16 V station wagon? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos