Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Old Radio and Install a New One

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Car stereo

If you own a Citroen Xsara-Picasso and want to replace the factory radio unit, this guide explains how to proceed. Using a small flathead screwdriver, lift the two side tabs on the front panel and raise them; this will allow access to the Torx screws that need to be unscrewed and removed. This operation will enable you to remove the tabs and then extract the entire radio unit. Now, disconnect all electrical connections. After verifying the wiring compatibility, take the new radio unit, reconnect the electrical connections, and carefully push it into its slot until it clicks into place. Now insert the front panel frame. Insert the front panel and test the result.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the alternator of the Citroen Xsara Picasso 1.6 16V
How to replace the alternator of the Citroen Xsara Picasso 1.6 16V
Citroen Xsara Picasso (1999-2012 / MK 1) Today we will see the main instructions that will allow us to disassemble and replace the alternator of the Citroen Xsara Picasso 1.6 16V. First of a…
How to Remove the Auxiliary Belt of a Citroen Xsara Picasso
How to Remove the Auxiliary Belt of a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you can start, you need to lift the front of your Citroen Xsara Picasso. This will give you access to the auxiliary belt. Begin by loosening t…
How to Replace the Armrest Mechanism of the Front Seat in a Xsara Picasso
How to Replace the Armrest Mechanism of the Front Seat in a Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) This video shows that the armrest of the front seat in a Xsara Picasso is completely broken, making it unusable. Fortunately, a replacement part for …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos