Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5
    4. : How do you replace the headlights on the Citroà «n C5?

Citroen C5 - Video tutorial

Model: Citroen C5 RD, MK 2, X7 - Years 2008-2017
Part: Headlight
Operation: How do you replace the headlights on the Citroà «n C5?

In order to replace the headlights of the Citroà «n C5, you must first open the hood and remove the rivets that secure the plastic cover of the front of the engine compartment. Subsequently, it will be necessary to loosen the bolts located in the lower part of the bumper and inside the wheel arch, to be able to move aside its internal cover. Inside the wheel arch there will be two hooks that will have to be rotated using the specific key, as shown in the video. In this way the bumper will be completely detached and it will be possible to loosen the bolts of the lower part of the headlight. Once the connector has been removed from its rear, it will be possible to completely remove the headlight.


Posted on 6 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C5 2008-2017 - How to set the automatic ignition of the headlights of the Citroen C5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos