Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Oil Filter Change on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Engine oil

Working with the engine off and the handbrake engaged, lift the bonnet and secure it. Unscrew the upper cap of the engine bay, clearly indicated in the video. Raise the vehicle with a jack and place safety stands underneath. Using a flat screwdriver, remove all screws securing the lower engine cover. Position a container beneath the oil sump and unscrew the 21 mm drain bolt. Collect the oil and dispose of it properly. While it drains, proceed to replace the filter as shown in the video. Tighten the drain bolt and refill with new oil.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil Change on Citroen C3
Oil Change on Citroen C3
Citroen C3 (2002-2009 / FC, FN) Perform the oil change at the mileage specified by the manufacturer. Lift the engine compartment release lever located at the bottom left of the dash…
Engine Oil and Oil Filter Change on a Citroen C3
Engine Oil and Oil Filter Change on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Citroen C3. First, open the bonnet and remove the engine cov…
How to Change Oil and Filter on Citroen C3
How to Change Oil and Filter on Citroen C3
Citroen C3 (2009-2016 / SC) Learn how to service your Citroen C3, including the oil change. Follow these steps. Lift the car using a jack and unscrew the bolt from the oil sump …

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2009-2016 - How many liters of engine oil does it take in the Citroen C3 1.2 petrol engine? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos