Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil and Filter on Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Engine oil

Learn how to service your Citroen C3, including the oil change. Follow these steps. Lift the car using a jack and unscrew the bolt from the oil sump (let the fluid drain into a container); using a socket spanner, unscrew the large securing bolt of the container cap where the oil filter is located. Remove the air filter kit to access the filter, then extract the worn oil filter and fit a new one. Finally, top up the new oil in the engine and replace the air filters. Close the bonnet at the end of the service.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil filter of the Citroen C3 petrol model
How to replace the oil filter of the Citroen C3 petrol model
Citroen C3 (2016-2023 / SY, SX) In this video, we see a particularly practical method for replacing the oil filter of the Citroen C3 gasoline. We know that the oil filter loses part…
Engine Oil and Oil Filter Change on a Citroen C3
Engine Oil and Oil Filter Change on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) In this video tutorial, you will learn how to replace the engine oil and oil filter on a Citroen C3. First, open the bonnet and remove the engine cov…
How to Change Oil and Filter DIY on a Citroen C3 1.4 Petrol
How to Change Oil and Filter DIY on a Citroen C3 1.4 Petrol
Citroen C3 (2002-2009 / FC, FN) On the Citroen C3 1.4 petrol, the oil change with filter replacement is performed with the vehicle off and safely. Lift the car at suitable support p…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2009-2016 - How many liters of engine oil does it take in the Citroen C3 1.2 petrol engine? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos