Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Removing the lock cylinder Citroen C3

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Lock
Operation: Removing the lock cylinder Citroen C3

Let's see how to remove the lock cylinder of a Citroen C3 first series, following these simple steps. First of all, open the front door and remove the plastic cover of the grip handle, in order to unscrew the screws below; then we are going to remove the side screws of the door panel in order to detach it, as shown in the video. At this point we unscrew the side screws of the lock and levering the sides of the cylinder we remove the cover and the cylinder itself. We just have to replace the lock with the new one!


Posted on 29 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2016-2023 - How much does it cost to replace the lock on my Citroen C3? Read Answer
    • C3 2002-2009 - Cost of changing door lock Citroen C3? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos