Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Car Radio on a Citroen Berlingo MK2

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Car stereo

In this video, we will see the main steps to remove the original car radio and replace it with a new one (2 DIN) on the second series Citroen Berlingo, as well as on the Peugeot Partner. First, get inside the car and insert the appropriate radio removal tools into the holes, as shown in the video; pull the radio outwards and disconnect the electrical connectors found at the back. Once removed, take out the original bracket to install the new one. All that’s left is to adapt the wiring to the new radio!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the radio of the Citroen Berlingo 2
How to disassemble the radio of the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In the following guide dedicated to all of you who own a Citroen Berlingo Mk2, we will discover the steps you need to take to correctly and safely re…
How to reset the radio in a Citroën Berlingo?
How to reset the radio in a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To reset the radio in the Citroën Berlingo, connect a diagnostic tool to the vehicle's OBD port: this port is located at the bottom of the steering c…
How to Replace the Battery in a Citroën Berlingo
How to Replace the Battery in a Citroën Berlingo
Citroen Berlingo (2008-2018 / MK 2) To replace the battery in a Citroën Berlingo, open the bonnet to access the components in the engine bay. Here, on the right side, you will find the …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos