Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the radio in a Citroën Berlingo?

Model: Citroen Berlingo MK 2 - Years 2008-2018
Part: Warning light – error code

To reset the radio in the Citroën Berlingo, connect a diagnostic tool to the vehicle's OBD port: this port is located at the bottom of the steering column. Once the scanner is connected, select the car model and its corresponding version: by following the further instructions provided in the tutorial, you can reset the errors to restore the radio settings. After the reset, disconnect the scanner.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the radio of the Citroen Berlingo 2
How to disassemble the radio of the Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In the following guide dedicated to all of you who own a Citroen Berlingo Mk2, we will discover the steps you need to take to correctly and safely re…
Replacing the Radio in a Citroen Berlingo
Replacing the Radio in a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Today's guide will show you the main instructions on how to remove and replace the standard radio in the Citroen Berlingo, in simple and quick steps.…
How to Replace the Radio in a Citroën Berlingo?
How to Replace the Radio in a Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To replace the radio in a Citroën Berlingo, use a tool to pry off the upper part of the central dashboard panel, disconnecting the connectors as well…

    Frequently Asked Questions

    • Berlingo 2008-2018 - How to reset the radio of the Citroen Berlingo? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos