Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio in a Citroen Berlingo

Model: Citroen Berlingo MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Car stereo

See other generations:
Video tutorial

Today's guide will show you the main instructions on how to remove and replace the standard radio in the Citroen Berlingo, in simple and quick steps. First, get inside the vehicle and start removing the standard radio; to do this, use the appropriate extraction tools to insert into the radio holes, pulling it out from the dashboard, as shown in the video.

At this point, disconnect the electrical connectors found on the back of the radio; then install the new radio compatible with the vehicle, following the video tutorial to the end!


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to reset the radio in a Citroën Berlingo?
How to reset the radio in a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To reset the radio in the Citroën Berlingo, connect a diagnostic tool to the vehicle's OBD port: this port is located at the bottom of the steering c…
Replacement of the Citroen Berlingo antenna
Replacement of the Citroen Berlingo antenna
Citroen Berlingo (2008-2018 / MK 2) In this guide we will see the instructions that will allow us to disassemble and replace the antenna of the Citroen Berlingo, but also of the Peugeot…
How to Remove the Radio from a Citroen Berlingo 2
How to Remove the Radio from a Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this guide for all Citroen Berlingo Mk2 owners, discover the steps to safely and correctly remove the standard radio. First, enter the cabin and e…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos