Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radio from a Citroen Berlingo

Model: Citroen Berlingo MK 3 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Car stereo

See other generations:
Video tutorial

Follow these brief and simple instructions to remove and replace the standard radio in a Citroen Berlingo. First, get into the vehicle and start by prying on the side of the air vent grilles, disconnecting the electrical connector found at the back to remove them.

Then, unscrew all the fixing screws located at the bottom to detach and remove the standard radio, disconnecting the wiring at the rear as shown in the video. At this point, replace and install the new radio by reversing the procedure!


Updated on 9 October 2026 by ScegliAuto


Related tutorials

How to Replace the Radio in a Citroën Berlingo?
How to Replace the Radio in a Citroën Berlingo?
Citroen Berlingo (2018-2026 / MK 3) To replace the radio in a Citroën Berlingo, use a tool to pry off the upper part of the central dashboard panel, disconnecting the connectors as well…
How to Remove the Radio from a Citroen Berlingo 2
How to Remove the Radio from a Citroen Berlingo 2
Citroen Berlingo (2008-2018 / MK 2) In this guide for all Citroen Berlingo Mk2 owners, discover the steps to safely and correctly remove the standard radio. First, enter the cabin and e…
How to reset the radio in a Citroën Berlingo?
How to reset the radio in a Citroën Berlingo?
Citroen Berlingo (2008-2018 / MK 2) To reset the radio in the Citroën Berlingo, connect a diagnostic tool to the vehicle's OBD port: this port is located at the bottom of the steering c…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos