Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Headlight bulb

In today's tutorial video, you will learn how to remove and replace the dipped beam xenon bulb in the front headlamp of the Citroen C4 Grand Picasso. First, open the bonnet and start by removing the plastic protective cap of the bulb; then remove the bulb holder and the xenon control unit by disconnecting its electrical connector, as shown in the video. At this point, replace the bulb with a new one of the correct type, inserting and connecting it properly inside the front headlamp, following the video until the end!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Dipped Beam Bulb on a Citroen C4 Picasso?
How to Replace the Dipped Beam Bulb on a Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) To replace the dipped beam bulb on your Citroen C4 Picasso, first open the bonnet, lift the appropriate cover, and secure it with the prop rods. Loca…
Replacing the Dipped Beam Bulb on a Citroen Grand C4 Picasso
Replacing the Dipped Beam Bulb on a Citroen Grand C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this video, we will see how to remove and replace the front headlamp bulb on a Citroen C4 Picasso by following these simple steps. First, open the…
How to Replace the Front Headlamp Bulb on the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this short guide, you will see how to remove and replace the dipped beam bulb in the front headlamp of the Citroen C4 Picasso. First, open the bon…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos