Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Citroen Grand C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

See other generations:
Video tutorial

In this video, we will see how to remove and replace the front headlamp bulb on a Citroen C4 Picasso by following these simple steps. First, open the bonnet of your car and remove the plastic protective cap behind the headlamp; then pull out the bulb holder along with the bulb, as shown in the video.

At this point, unclip the old bulb and replace it with the new one of the correct type (in this case, H7); then insert the new bulb and connect it, checking its operation afterwards!


Updated on 6 April 2026 by ScegliAuto


Related tutorials

Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In today's tutorial video, you will learn how to remove and replace the dipped beam xenon bulb in the front headlamp of the Citroen C4 Grand Picasso.…
How to Replace the Dipped Beam Bulb on a Citroen C4 Picasso?
How to Replace the Dipped Beam Bulb on a Citroen C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) To replace the dipped beam bulb on your Citroen C4 Picasso, first open the bonnet, lift the appropriate cover, and secure it with the prop rods. Loca…
Replacing the Bulb on Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Lift the bonnet and insert the support rod. Remove the round rubber cover located behind the affected headlamp, disconnect the dipped beam connector,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos