Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulb on Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Headlight bulb

See other generations:
This video is currently unavailable

Lift the bonnet and insert the support rod. Remove the round rubber cover located behind the affected headlamp, disconnect the dipped beam connector, and open the metal clip that secures the bulb in place. Once the clip is released, you can extract the bulb.

Insert the new bulb you purchased into the designated slot in the headlamp. At this point, close the metal clip and reconnect the bulb connector.

Remember to refit the round rubber cover that was initially removed. This is a straightforward operation for anyone.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In today's tutorial video, you will learn how to remove and replace the dipped beam xenon bulb in the front headlamp of the Citroen C4 Grand Picasso.…
How to Replace the Headlight Bulbs on a Citroen C4 Picasso
How to Replace the Headlight Bulbs on a Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Are the bulbs damaged on your Citroen C4 Grand Picasso? Here’s how to replace the bulbs in the front headlamp. Open the front bonnet by pulling the l…
Replacing the Dipped Beam Bulb on a Citroen Grand C4 Picasso
Replacing the Dipped Beam Bulb on a Citroen Grand C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this video, we will see how to remove and replace the front headlamp bulb on a Citroen C4 Picasso by following these simple steps. First, open the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos