Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Citroen C4 Picasso?

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Checks and maintenance

To replace the dipped beam bulb on your Citroen C4 Picasso, first open the bonnet, lift the appropriate cover, and secure it with the prop rods. Locate the headlamp where the bulb needs replacing and disconnect the plastic connector. Remove the rubber cap covering the bulb, pull the bulb connector, extract it, and detach the metal clip that holds it in place. Fit the new bulb and reverse all the steps taken to remove the old bulb, and the job will be complete.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Citroen C4 Picasso
Citroen C4 Picasso (2006-2013 / MK 1) In this short guide, you will see how to remove and replace the dipped beam bulb in the front headlamp of the Citroen C4 Picasso. First, open the bon…
How to replace the front headlight bulb of the Citroen C4 Picasso
How to replace the front headlight bulb of the Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Below we will see how to disassemble and replace the dipped beam bulb of the front headlight of the Citroen C4 Picasso. First, open the hood of the c…
Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In today's tutorial video, you will learn how to remove and replace the dipped beam xenon bulb in the front headlamp of the Citroen C4 Grand Picasso.…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos