Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Citroen Xsara

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Car door

To begin, remove the handle trim and, using a screwdriver, take off the armrest by removing the two screws underneath. Next, unscrew the hidden screw under the handle, the cover of the speaker located at the bottom, and the four screws securing it to the door, ensuring to gently disconnect the connector before pulling the speaker away. Using a flat tool, remove the window winder. Now that you have removed all the screws, run your hand around the perimeter of the inner door and carefully detach the clips that secure it to the metal frame.

Updated on 17 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing Door Panel on Citroen Xsara Picasso
Replacing Door Panel on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Remove the door panel on a Xsara Picasso. Disconnect the battery terminals located in the engine bay. Remove the plastic from the door panel area (sp…
How to Remove the Door Panel of a Citroen Xsara Picasso
How to Remove the Door Panel of a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you start, open the door of your Citroen Xsara Picasso. First, unclip the insert of the internal door handle using a thin but sturdy tool as a…
How to Remove the Fan from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, we’ll show you how to remove the ventilation fan from a Citroen Xsara Picasso. First, remove the plastic covering of the centre tunnel…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos