Do it yourself
| ||||
|
How to reset the key of the Citroen C4 Grand Picasso Mk1
Model: Citroen C4 Picasso
MK 1
- Years 2006-2013 The guide shows how to retrieve the key code of the Citroen C4 Grand Picasso Mk1. To perform this operation, the ZED-Full device must be used. Once the device is connected to the vehicle's OBD port and powered, select the item â € œOBD Applicationâ € and then select the â € œCitroenâ € brand. At this point select the â € œCAN Busâ € mode; vehicle information will be shown. Select the item â € œRead PINCODEâ € and follow the instructions. This phase can take up to 20 minutes to complete. Switch the ignition off and on again and press the button to continue. At this point it is possible to configure the new keys by following the steps on the screen. At the end of the operation, check the correct functioning of the coded keys.
Posted on 17 May 2024 by ScegliAuto
How to reset the service in the Citroen C4 Grand Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In this tutorial we can see how to reset the service in the Citroen C4 Grand Picasso, an extremely simple and quick operation, to be carried out only
How to disassemble the rear headlight in the Citroen C4 Grand Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) In this tutorial, we can see how to disassemble the rear light on the Citroen C4 Grand Picasso, an extremely simple and fast operation. First of all,
How to reset the service in the Citroen C4 Grand Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) As we can see in this tutorial, resetting the service in the Citroen C4 Grand Picasso is a very simple and fast operation. Before proceeding, of cour Other guides that may interest you
|
How to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.080
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |