Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on the Citroen C4 Grand Picasso?

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Tail light

In this tutorial, you will see how to remove the rear light on the Citroen C4 Grand Picasso, a very simple and quick operation. First, ensure that the key is not inserted, then open the boot. Locate the two screws on the edge of the light unit and unscrew them using a Torx T20 spanner. Next, grasp the light, pull it towards you, and separate it from the bodywork. At this point, you can disconnect the power connector, transfer the bulbs to the replacement if necessary, and follow the reverse procedure.

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the front headlight of the Citroen C4 Grand Picasso
How to disassemble the front headlight of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the front headlight of the Citroen C4 Grand Picasso. First, we open …
Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Replacing the Xenon Dipped Beam Bulb on the Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In today's tutorial video, you will learn how to remove and replace the dipped beam xenon bulb in the front headlamp of the Citroen C4 Grand Picasso.…
Removing Fog Light and Replacing Bulb on Citroen Grand C4 Picasso
Removing Fog Light and Replacing Bulb on Citroen Grand C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this video, we will see how to remove the headlight and replace the bulb of the front fog light on the Citroen C4 Grand Picasso. First, we will ne…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos