Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen C3?

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Service warning light

This tutorial explains how to reset the service light on a Citroen C3. Before performing this simple and quick operation, ensure that all required maintenance work has been completed. Start by inserting the key but leave it in the initial position. Then, press and hold the button located to the right of the dashboard while simultaneously turning on the ignition. At this point, while keeping the button pressed, you will notice a countdown of 10 seconds, after which the service light will be reset. Restart the ignition to verify that the procedure was successful.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Citroen C3?
How to Reset the Service Light on a Citroen C3?
Citroen C3 (2002-2009 / FC, FN) As shown in this tutorial, resetting the service light on a Citroen C3 is an extremely simple and quick operation. Before proceeding, ensure that all…
How to Reset the Service on the Citroën C3?
How to Reset the Service on the Citroën C3?
Citroen C3 (2016-2023 / SY, SX) Resetting the service on the Citroën C3 is very simple; let's see how to proceed in the attached video tutorial. Obviously, this procedure should onl…
How to Reset the Service Light on a Citroen C3
How to Reset the Service Light on a Citroen C3
Citroen C3 (2009-2016 / SC) .. In this tutorial, we will see how to reset the service light on a Citroen C3, a very simple and quick operation to be performed only.. …

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos