Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wing Mirror on a Citroën C5?

Model: Citroen C5 DC, MK 1 - Years 2000-2008
Part: Side mirror

To replace the wing mirror on a Citroën C5, use a lever tool to detach the triangular inner cover located near the mirror. Once this is removed, loosen the bolts underneath and those on the outer part of the door. Next, unscrew the screws securing the inner door panel to remove it and loosen the final screws holding the mirror. The mirror can now be pulled out from the outside and replaced with a new part.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Wing Mirrors on the Citroen C5 MK1
How to Adjust the Wing Mirrors on the Citroen C5 MK1
Citroen C5 (2000-2008 / DC, MK 1) In this brief and simple guide, see how to adjust the external wing mirrors on the first series Citroen C5, as well as on other models from the manuf…
How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video, learn how to remove and replace the outside temperature sensor of the second series Citroen C5, as well as on most models from the Cit…
How to Replace the External Mirror Motor on the Citroën C5?
How to Replace the External Mirror Motor on the Citroën C5?
Citroen C5 (2008-2017 / MK 2, RD, X7) To replace the external mirror motor on the Citroën C5, use a screwdriver to pry under the glass so that it can be detached from its housing. Once th…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos