Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Mirror Motor on the Citroën C5?

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Side mirror

To replace the external mirror motor on the Citroën C5, use a screwdriver to pry under the glass so that it can be detached from its housing. Once the glass is removed, pry off the cover; when this is removed, you can disconnect all the wires and unscrew the screws located at the base of the mirror to remove the motor. Then, insert the new motor and reinstall all the components of the mirror that were previously removed.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel and window lift motor of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) Below we will see the main steps that will allow us to disassemble and replace the front door panel and the window motor of the Citroen C5. First of …
How to adjust the position of the external rearview mirror on a Citroen C5 car
How to adjust the position of the external rearview mirror on a Citroen C5 car
Citroen C5 (2008-2017 / MK 2, RD, X7) Today we will explain how to adjust the position of the external rearview mirrors on a Citroen C5 model 3, produced from 2008 to 2017. To perform thi…
How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video, learn how to remove and replace the outside temperature sensor of the second series Citroen C5, as well as on most models from the Cit…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos