Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outside Temperature Sensor of the Citroen C5 MK2

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017

In this video, learn how to remove and replace the outside temperature sensor of the second series Citroen C5, as well as on most models from the Citroen-Peugeot group. First, locate your temperature sensor, which is found on the right wing mirror; then, start by removing the plastic cover of the mirror by prying at the sides. At this point, disconnect the electrical connector of the sensor to remove the inner cover by unfastening the tabs; then disconnect and remove the temperature sensor, replacing it with the new one!

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Coolant Temperature Sensor on the Citroen C5
Replace the Coolant Temperature Sensor on the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this guide, follow the main instructions to remove and replace the coolant temperature sensor on the Citroen C5. First, open the bonnet and start …
Cleaning the MAF sensor of the Citroen C5 X7.
Cleaning the MAF sensor of the Citroen C5 X7.
Citroen C5 (2008-2017 / MK 2, RD, X7) If the Citroen C5 shows a non-progressive power delivery, especially at low revs, and at the same time the engine malfunction light comes on, we can …
How to replace the battery of the Citroen C5 2.0 HDI
How to replace the battery of the Citroen C5 2.0 HDI
Citroen C5 (2008-2017 / MK 2, RD, X7) The disassembly and replacement of the battery of the Citroen C5 2.0 HDI only requires the use of a ratchet or star key to disconnect the two cables.…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos