Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the TPMS Sensor on a Citroen C5 MK2

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Tire pressure warning light

In this video tutorial, we will see how to program the TPMS sensor on the second series Citroen C5, as well as on most vehicles; what you need is the tyre pressure sensor programming tool. So select the make, model, and year of the vehicle and perform the first test by bringing the tool close to the valve of the tyre, as shown in the video. At this point, proceed with the programming indicated by the tool, which starts by selecting the "programming" option; then reassemble the wheel onto the vehicle!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video, learn how to remove and replace the outside temperature sensor of the second series Citroen C5, as well as on most models from the Cit…
Replace the Coolant Temperature Sensor on the Citroen C5
Replace the Coolant Temperature Sensor on the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this guide, follow the main instructions to remove and replace the coolant temperature sensor on the Citroen C5. First, open the bonnet and start …
How to reset the TPMS light on the Citroen C5
How to reset the TPMS light on the Citroen C5
Citroen C5 (2021-2026 / C5 X, MK 3) The following video tutorial will illustrate the steps to reset the tire pressure warning light on a Citroen C5 vehicle. We select the settings icon …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos