Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Coolant Temperature Sensor on the Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017
Part: Engine coolant temperature sensor

In this guide, follow the main instructions to remove and replace the coolant temperature sensor on the Citroen C5. First, open the bonnet and start by disconnecting the intake hose by loosening the metal clip screw; then, locate the coolant temperature sensor underneath, disconnecting its electrical connector as shown in the video. At this point, unscrew and remove the sensor, replacing it with a new original one, allowing the fluid to drain into a container; install the new sensor and top up with the new antifreeze!

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
How to Replace the Outside Temperature Sensor of the Citroen C5 MK2
Citroen C5 (2008-2017 / MK 2, RD, X7) In this video, learn how to remove and replace the outside temperature sensor of the second series Citroen C5, as well as on most models from the Cit…
How to activate or deactivate the automatic windshield wipers of the Citroen C5
How to activate or deactivate the automatic windshield wipers of the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this short and simple guide, we will see how to activate or deactivate the automatic windscreen wiper sensor of the Citroen C5. First of all, get …
Guide to Replacing the Windscreen Washer Fluid Tube on a Citroen C5
Guide to Replacing the Windscreen Washer Fluid Tube on a Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) The main instructions in this guide will illustrate how to disassemble and replace the windscreen washer fluid tube on a Citroen C5. First, open the …

    Frequently Asked Questions

    • C5 2008-2017 - Where are the temperature sensors located on a Citroen C5? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos