Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Berlingo
    4. : Replacement of the mirror cap of the Citroen Berlingo MK1

Citroen Berlingo - Video tutorial

Model: Citroen Berlingo MK 1 - Years 1996-2013
Part: Outside rearview mirror
Operation: Replacement of the mirror cap of the Citroen Berlingo MK1

Let's see in this short video the main instructions to remove and replace the exterior mirror cap of the Citroen Berlingo first series. First, let's use a very thin plastic lever and start by levering the sides of the mirror cap, in order to release it from the clips; then we also remove the mirror glass, disconnecting the small connector on the back. At this point we push from the inside to definitively remove the cap, replacing it with the new one; then we apply the reverse procedure for reassembly!


Posted on 5 June 2024 by ScegliAuto



How to remove the exterior mirror of a Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Before we can start, we will have to go and open the front door of our Citroen Berlingo. So let's start by disengaging and removing the internal cove
How to replace the mirror of the Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) In this video, the step-by-step procedure for replacing the Citroen Berlingo side mirror is shown. The procedure is simple, and requires a flathead s
Low beam replacement on Citroen Berlingo
Citroen Berlingo (1996-2013 / MK 1) Let's see what to do when we have burnt out headlight bulbs. We replace the headlight bulbs of a Citroen Berlingo. We lift the front cover hood, we i

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos