Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the BSI in the Citroen C2

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Warning light – error code

See how to reset the BSI in the Citroen C2. Lower the driver's side window, lift the bonnet, and ensure all instrumentation is off. Make sure all doors are closed and remove the key from the ignition. Wait for about 3 minutes. Disconnect the vehicle's battery and wait 15 seconds. Reconnect the vehicle's battery, wait another 10 seconds (without opening the doors). Now, turn on the sidelights through the driver's window. Turn the key and hold down the lock button on the key for 10 seconds. Remove the key, open and close the door, and test the central locking system. Start the engine and complete the system check.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the BSI unit of the Citroen C2
How to reset the BSI unit of the Citroen C2
Citroen C2 (2003-2010 / MK 1) These short and simple steps will show us how to reset the BSI unit of the Citroen C2. In order to reset the BSI unit, which includes the fuse box, i…
How to Reset the Service Light on Citroen C2
How to Reset the Service Light on Citroen C2
Citroen C2 (2003-2010 / MK 1) Follow these simple steps to reset the service light for the routine oil change on a Citroen C2. First, get inside the car and press and hold the but…
How to Reset the Service on a Citroen C2
Citroen C2 (2003-2010 / MK 1) How to reset the service on a Citroen C2. This is a very simple operation: Enter the vehicle, turn on the ignition with the appropriate key (you will…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos