Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shell and Key of the Citroen C2 Remote

Model: Citroen C2 MK 1 - Years 2003-2010
Part: Key

Today's instructions will show you how to disassemble and replace the key and shell of the Citroen C2 remote in simple steps. First, take your remote and start by unscrewing the small screw of the remote, removing the physical key; then lever it open into two parts, removing the battery, the circuit board, and the transponder, as shown in the video. At this point, transfer everything to the new key shell, reassembling all components in order, and finally refit and secure the physical key to complete the task!

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the remote battery on the Citroën C2?
How to replace the remote battery on the Citroën C2?
Citroen C2 (2003-2010 / MK 1) To replace the remote battery on the Citroën C2, use a tool like a screwdriver to pry open the groove that forms between the two halves of the plasti…
How do you replace the key shell and repair the opening button in a Citroen C2?
How do you replace the key shell and repair the opening button in a Citroen C2?
Citroen C2 (2003-2010 / MK 1) Don't worry, if the shell of your car key is broken or the opening button no longer works, you can still repair it yourself. Get a compatible new she…
How to Reprogram the Remote Control on a Citroën C2?
How to Reprogram the Remote Control on a Citroën C2?
Citroen C2 (2003-2010 / MK 1) To reprogram the remote control on a Citroën C2, ensure the device is properly closed after replacing the battery. It is after this operation that yo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos