Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on a Citroen C4 Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Service warning light

In this short video tutorial, you can see how to reset the oil life indicator on a Citroen C4 Picasso, model produced from 2006 to 2013, using a combination of buttons. To perform this operation, you must have changed the engine oil and the corresponding filter beforehand. First, with the engine off, press and hold the right button located on the left side of the speedometer. Now, turn on the instrument panel without starting the engine. Once done, a countdown will begin in the bottom left of the speedometer; wait for it to finish and then release the button you pressed earlier to complete the reset.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on Citroen C4 Picasso 2
How to Reset the Service Light on Citroen C4 Picasso 2
Citroen C4 Picasso (2013-2022 / MK 2) In this video tutorial, you will learn how to reset the service light on the onboard computer of a Citroen C4 Picasso second series, following the in…
How to Reset the Service Light on a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) To manually reset the service light on your Citroen C4 Picasso takes just a few seconds. Here’s what you need to do. First, get inside the cabin and …
How to Reset the Service Light on the Citroën C4 Picasso?
How to Reset the Service Light on the Citroën C4 Picasso?
Citroen C4 Picasso (2006-2013 / MK 1) To reset the Service light on the Citroën C4 Picasso, press and hold the button located to the left of the instrument panel for a few seconds. While …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos