Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Oil and Filter in a Citroën C4 Picasso

Model: Citroen C4 Picasso MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Engine oil

See other generations:
Video tutorial

To replace the engine oil and filter in a Citroën C4 Picasso, park the vehicle on a level surface and safely lift it to access the underside of the engine. Place a drain pan under the oil sump, unscrew the filler cap in the engine compartment, and then the drain plug located under the sump.

Allow the used oil to drain completely, and once finished, reinstall the drain plug, ensuring the gasket is in good condition. Locate the oil filter, unscrew it with the appropriate tool, and remove it from its seat.

Lubricate the gasket of the new filter with a small amount of clean oil and install it by screwing it on until properly tightened. Pour the new engine oil through the filler neck, check the level with the dipstick, and add more if necessary.

Start the engine for a few seconds, turn it off, and check for leaks around the filter and drain plug.


Posted on 9 June 2026 by ScegliAuto


Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) Today we will explain how to replace the engine oil and oil filter on the Citroen C4 Picasso. We open the hood of the vehicle and remove the oil tank…
Citroen C4 Picasso (2006-2013 / MK 1) Let’s see how to change the oil and filter on a C4 Grand Picasso. Lift the front bonnet of the car, locate the oil filter, and prepare for removal. U…
Citroen C4 Picasso (2013-2022 / MK 2) Replacing the engine oil and oil filter is a straightforward and quick task that you can do yourself on a Citroen C4 Picasso. First, open the front b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos