Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing Engine Oil on Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Engine oil

See other generations:
Video tutorial

Let’s see how to change the oil and filter on a C4 Grand Picasso. Lift the front bonnet of the car, locate the oil filter, and prepare for removal.

Unscrew the large securing bolt of the container cap where the oil filter is located. Move the various wiring to access the filter.

Remove the worn oil filter and position a new one. Raise the car on a jack and unscrew the bolt of the oil sump: allow the fluid to drain into a container. Refill the engine with new oil and close the front bonnet after maintenance.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

Change the glow plugs on a Citroen C4 Grand Picasso
Change the glow plugs on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Changing the glow plugs on a Citroen C4 Grand Picasso? Start by opening the engine bay. Pull the lever to open the engine bay located at the bottom l…
Replacing the Gearbox Oil on the Citroen C4 Grand Picasso MK2
Replacing the Gearbox Oil on the Citroen C4 Grand Picasso MK2
Citroen C4 Picasso (2013-2022 / MK 2) This video shows how to remove and replace the gearbox oil on the second generation Citroen C4 Grand Picasso, following these simple steps. First, li…
Guide to Replacing the Battery on a Citroen C4 Grand Picasso
Guide to Replacing the Battery on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today's guide will show you the main steps on how to remove and replace the battery on a Citroen C4 Grand Picasso and C4 Picasso. First, open the bon…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos