Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How do you replace the cabin filter on the 2018 Citroà «n C3?

Citroen C3 - Video tutorial

Model: Citroen C3 SX, SY - Years 2016-2023
Part: Cabin air filter
Operation: How do you replace the cabin filter on the 2018 Citroà «n C3?

In order to replace the cabin filter on the 2018 Citroà «n C3, you have to go and open the hood, so that you can have access to the upper part of the engine compartment. There will be a grille here which must be pried off to remove it from its housing. Below it will be the old cabin filter which can be removed from its housing. Once the old filter has been removed, it will be possible to insert a new one, closing its housing with the previously removed grille and also closing the hood.


Posted on 29 September 2022 by ScegliAuto

    Frequently Asked Questions

    • C3 2002-2009 - Where is the Citroen C3 cabin air filter located? Read Answer
    • C3 2009-2016 - Where is the cabin filter of the Citroen C3 II? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos