Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Tubes on a Citroen C5

Model: Citroen C5 MK 2, RD, X7 - Years 2008-2017

Follow this guide to remove and replace the windscreen washer tubes on a Citroen C5 with these simple and quick steps. First, open the bonnet and locate the windscreen washer tubes, which are suspended on the bonnet; disconnect them from the washer nozzles, then remove them from the washer fluid reservoir (accessing it from the front right wheel arch), as shown in the video. At this point, connect the windscreen washer tube securely to both the reservoir and the final dispensers; then check its operation!

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Windscreen Washer Fluid Tube on a Citroen C5
Guide to Replacing the Windscreen Washer Fluid Tube on a Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) The main instructions in this guide will illustrate how to disassemble and replace the windscreen washer fluid tube on a Citroen C5. First, open the …
Replace the Coolant Temperature Sensor on the Citroen C5
Replace the Coolant Temperature Sensor on the Citroen C5
Citroen C5 (2008-2017 / MK 2, RD, X7) In this guide, follow the main instructions to remove and replace the coolant temperature sensor on the Citroen C5. First, open the bonnet and start …
How to Replace the Radiator
How to Replace the Radiator
Citroen C5 (2000-2008 / DC, MK 1) First, place a container under the radiator. Using pliers, remove the two clips that secure the two lower water pipes leading to the radiator. Remove…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos