Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the ignition barrel in a Citroen Jumper van?

Model: Citroen Jumper MK 1 - Years 1994-2006
Part: Checks and maintenance

As shown in this tutorial, replacing the ignition barrel in a Citroen Jumper van is a very simple and quick operation. First, go inside the cabin and unscrew the four screws securing the lower cover of the steering column. Next, remove the upper cover, locate the two fixing bolts of the barrel, and unscrew them. This step may be tricky as they have a rounded head. Once unscrewed, you can remove the barrel, disconnect the connector, and install the new part.

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the ignition cylinder of the Citroen Jumper
Replacement of the ignition cylinder of the Citroen Jumper
Citroen Jumper (2014-2024 / MK 3) Today's main instructions will show us how to disassemble and replace the ignition cylinder of the Citroen Jumper, as well as the Peugeot Boxer and F…
How to Remove the Rear Headlamp on a Citroen Jumper Van?
How to Remove the Rear Headlamp on a Citroen Jumper Van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial, see how to remove the rear headlamp on a Citroen Jumper van, a very simple operation, for example, when replacing a bulb or the hea…
How to reset the service light in the Citroen Jumper van?
How to reset the service light in the Citroen Jumper van?
Citroen Jumper (2014-2024 / MK 3) In this tutorial we can see how to reset the service in the Citroen Jumper van, an extremely simple and quick operation, to be carried out only once …

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos