Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Where is the fuse box on the Citroen Xsara

Citroen Xsara - Video tutorial

Model: Citroen Xsara MK 1 - Years 1997-2006
Part: Fuse box
Operation: Where is the fuse box on the Citroen Xsara

If you still haven't been able to find the fuse box inside your Citroen Xsara, don't worry because thanks to the following guide you will be able to do it in a few seconds and above all in safety. In fact, all you have to do is go inside the passenger compartment and reach the driver's side. Once you've made sure you've turned off the car completely, locate the small compartment located in the lower left part of the dashboard and remove the cover present in order to have access to all the fuses you were looking for. Before working on them, remember to disconnect the battery.


Posted on 3 December 2022 by ScegliAuto

    Frequently Asked Questions

    • Xsara 1997-2006 - Fuse diagram of the Citroen Xsara? Read Answer
    • Xsara 1997-2006 - Where is the fuse box on the Citroen Xsara Picasso located? Read Answer
    • Xsara 1997-2006 - Where is the Citroà «n Xsara fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos