Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara
    4. : Where are the fuse boxes located on the Citroen Xsara?

Citroen Xsara - Video tutorial

Model: Citroen Xsara MK 1 - Years 1997-2006
Part: Fuse box
Operation: Where are the fuse boxes located on the Citroen Xsara?

In this video, we see where the fuse boxes of the Citroen Xsara are located: we find the first one inside the passenger compartment, on the lower left side of the dashboard, behind a protective cover. In this box, we find fuse #23, which is for the cigarette lighter/power socket and is a 20 Amp fuse. Above the pedals, to the right of the fuse box (still inside the passenger compartment), we also find a relay box. Finally, we will also find a fuse box in the engine compartment, specifically between the starter battery and the right side of the body (when looking at the car from the front).


Posted on 26 August 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Xsara 1997-2006 - Fuse diagram of the Citroen Xsara? Read Answer
    • Xsara 1997-2006 - Where is the fuse box on the Citroen Xsara Picasso located? Read Answer
    • Xsara 1997-2006 - Where is the Citroà «n Xsara fuse box located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos