Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the 2012 Citroen Jumper

Model: Citroen Jumper MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

To reset the services on the Citroen Jumper, do the following: Insert the key without turning on the ignition, press the accelerator fully down and the brake, and wait for ten seconds. After ten seconds, turn on the ignition while keeping the accelerator and brake pressed.

After another ten seconds, release the brake pedal while keeping the accelerator pressed for another six seconds. After six seconds, press the brake five times.

Then, turn off the ignition while keeping the accelerator pressed. Once the ignition is off and the key is removed, release the accelerator.

The reset should have occurred. To check if the reset was successful, press the mode button to scroll through the menu and go to the service option to verify that everything is in order.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Citroen Jumper III
How to Reset the Service Light on a Citroen Jumper III
Citroen Jumper (2014-2024 / MK 3) Let's see how to reset the service light on a Citroen Jumper Mk III. After completing the required services from the service schedule, get in the veh…
How to Reset the Tyre Pressure Warning Light on the Citroën Jumper
How to Reset the Tyre Pressure Warning Light on the Citroën Jumper
Citroen Jumper (2006-2014 / MK 2) To reset the tyre pressure warning light on the Citroën Jumper, inflate the tyres to the correct pressure value: this value is indicated on the stick…
How to Reset the Service Light on the Citroën Jumper?
How to Reset the Service Light on the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) To reset the Service light on the Citroën Jumper, turn on the instrument cluster without starting the vehicle; then, press the accelerator pedal and …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos