Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Remote Key Shell on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Key

To replace the remote key cover of your vehicle and make it look much more modern, follow the instructions in this video and the description below. First, purchase an aftermarket three-button cover. Then, open the new remote by unscrewing the screws at the back and detach the cover of the old remote. Next, remove the circuit board from the old key and place it onto the new one. Then, fit the key fob onto the new remote by removing the retaining pin from the old key and transferring it to the new one, and you're done.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Key Shell of the Citroen C3 - Peugeot 207
Replacing the Key Shell of the Citroen C3 - Peugeot 207
Citroen C3 (2002-2009 / FC, FN) This guide provides instructions on how to disassemble and replace the remote key shell of the Citroen C3, as well as the Peugeot 207. First, take yo…
How to replace the key shell for the Citroën C3?
How to replace the key shell for the Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the key shell for the Citroën C3, loosen the screw located on the back of the shell, just below the key. Once the screw is loosened, you c…
How to Replace the Key Shell of the Citroen C3
How to Replace the Key Shell of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Remove the keyring to avoid any obstructions later. Now, unscrew the small screw located at the back of the remote. Using a lever, gently separate th…

    Frequently Asked Questions

    • C3 2016-2023 - Why don't the USB sticks on the Citoren C3 work? Read answer
    • C3 2016-2023 - What does the wrench light on my Citroen C3 mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos