Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Shell of the Citroen C3 - Peugeot 207

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Key

This guide provides instructions on how to disassemble and replace the remote key shell of the Citroen C3, as well as the Peugeot 207. First, take your remote control and start by removing the key by taking out the small pin; then pry open the remote into two parts, removing the electronic board and the transponder, as shown in the video. At this point, transfer all components to the new key shell; correctly insert the electronic board and replace the battery, reassembling everything!

Updated on 18 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the key shell for the Citroën C3?
How to replace the key shell for the Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the key shell for the Citroën C3, loosen the screw located on the back of the shell, just below the key. Once the screw is loosened, you c…
How to change the remote control battery for the Citroen C3 MK1 - Peugeot 207
How to change the remote control battery for the Citroen C3 MK1 - Peugeot 207
Citroen C3 (2002-2009 / FC, FN) .. for the first series Citroen C3 and also for the Peugeot 207. First, take your remote control and start by prying open the side slot of the remote to.. …
How to Replace the Key Shell of the Citroen C3
How to Replace the Key Shell of the Citroen C3
Citroen C3 (2002-2009 / FC, FN) Remove the keyring to avoid any obstructions later. Now, unscrew the small screw located at the back of the remote. Using a lever, gently separate th…

Other guides you may be interested in

    Frequently Asked Questions

    • C3 2016-2023 - Why don't the USB sticks on the Citoren C3 work? Read answer
    • C3 2016-2023 - What does the wrench light on my Citroen C3 mean? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos