Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroën C3 Picasso?

Model: Citroen C3 Picasso MK 1 - Years 2008-2017
Part: Service warning light

The procedure to reset the service light on the Citroën C3 Picasso involves pressing and holding the 0.00 button located at the bottom left of the instrument panel. While holding it, insert the ignition key into the ignition barrel and turn it to switch on the instrument panel: when it lights up, a countdown will appear starting from ten. Once the countdown has finished, you can release the button and switch off the ignition. When it is turned back on, you will see that the service light has been cleared from the instrument panel.

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the "Service" indicator on a Citroen C3 Picasso?
How to reset the "Service" indicator on a Citroen C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) To reset the "Service" light on a Citroen C3 Picasso, proceed as follows: make sure the engine is off and insert the key into the instrument panel. P…
How to Reset the Tyre Pressure Light on a Citroën C3 Picasso?
How to Reset the Tyre Pressure Light on a Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) You can completely clear the Service light on the Citroën C3 Picasso by inflating the tyres to the optimal pressure value: this value is indicated on…
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
How to reset the tyre pressure warning light on the Citroën C3 Picasso?
Citroen C3 Picasso (2008-2017 / MK 1) You can make the tyre pressure warning light on the Citroën C3 Picasso disappear by inflating the tyres until they reach the recommended pressure val…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos