Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Citroen C4 SpaceTourer?

Model: Citroen C4 Spacetourer MK 2 - Years 2013-2022
Part: Door trim panel

In this tutorial, you will see how to remove the door panel on a Citroen C4 SpaceTourer, a very simple operation. First, use a plastic spatula to remove the front part of the armrest handle, then unscrew the two screws located inside it. Next, unscrew the screw on the inner edge and, using the spatula again, pry the panel away from the door along the entire perimeter. At this point, you can finally detach the panel, disconnect the window switch console, and fit the replacement.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port of the Citroen C4 Spacetourer located?
Where is the OBD port of the Citroen C4 Spacetourer located?
Citroen C4 Spacetourer (2013-2022 / MK 2) If you own a Citroen C4 Spacetourer and want to find out where the OBD port is located, you just need to read the following guide and follow the desc…
How to reset the service indicator light of the Citroen C4 Spacetourer
How to reset the service indicator light of the Citroen C4 Spacetourer
Citroen C4 Spacetourer (2013-2022 / MK 2) The following instructions will show us the procedure for resetting the service maintenance light on the Citroen C4 Spacetourer. First, get into the …
How to reset the service indicator on a Citroen C4 Spacetourer
How to reset the service indicator on a Citroen C4 Spacetourer
Citroen C4 Spacetourer (2013-2022 / MK 2) In this video, we see how to reset the service light on a Citroen C4 Spacetourer: as with all cars, when getting in, we must make sure that all doors…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos