Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2016 Citroen C3

Model: Citroen C3 SC - Years 2009-2016
Part: Service warning light

To reset the service light on a 2016 Citroen C3, turn on the ignition and then press the reset button, which has the symbol of a spanner. The button is easily visible as it is located on the dashboard just below the rev counter. Now wait for the light to start flashing, and shortly after, a countdown from 10 to 0 will begin. When the countdown is finished, the car will turn off. You can then start the car to check that the service light reset has occurred correctly. If it has not, it is advisable to visit an authorised workshop to understand the reason.

Updated on 22 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the service light on the Citroen C3
How to reset the service light on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) The reset of the service light on the Citroen C3 vehicle follows the same procedure as resetting the light related to the maintenance of Peugeot vehi…
How to Reset the Service Light on a Citroen C3
How to Reset the Service Light on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) Today, you will learn the steps to reset the service light on the Citroen C3. To reset, press the button with the spanner symbol on the instrument pa…
How to Reset the Service Light on a 2009 Citroen C3
How to Reset the Service Light on a 2009 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Resetting the service light related to the service interval on a Citroen C3 vehicle follows very simple and quick steps that can be done independentl…

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos