Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5 Aircross
    4. : Where is the OBD port located on the 2019 Citroen C5?

Citroen C5 Aircross - Video tutorial

Model: Citroen C5 Aircross MK 1 - Years 2017-2022
Operation: Where is the OBD port located on the 2019 Citroen C5?

To be able to find the OBD port in your 2019 Citroen C5 Aircross, you just need to follow these steps. First, enter the car and make sure it is completely turned off and safely parked. Next, locate the panel below the steering wheel and remove it completely with your own hands, being careful not to damage it. Once you have done this, locate the OBD port you were looking for on the lower right side. Then, connect a diagnostic tool if necessary to identify and fix any issues with the engine control unit, and you're done.


Posted on 25 April 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C5 Aircross 2017-2022 - What problems with the Adblue additive on the Citroen C5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos