Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Air Filter on a Citroen C4 Grand Picasso

Model: Citroen C4 Picasso MK 1 - Years 2006-2013
Part: Air filter

In this video, learn how to change the air filter on a Citroen C4 Grand Picasso: open the front bonnet, and you will find a cover secured by three long screws. Remove these screws to take off the cover underneath. You also need to remove the air duct to gain better access. Now lift the lower cover (it wouldn't come off without removing the duct) and take out the filter. Before fitting the new, clean filter, give the compartment a dusting to remove dirt and debris; a blast of compressed air is also acceptable. Now insert the new filter in the correct position, refit the duct, tighten the screws, and reposition the cover. Job done.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Air Filter on a Citroen C4 Grand Picasso
How to Change the Engine Air Filter on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) In this video, see how to replace the air filter on a Citroen C4 Grand Picasso. Start by removing the engine cover and the air intake manifold. Unscr…
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Dismantling the Airbag Switch Module on a Citroen C4 Grand Picasso
Citroen C4 Picasso (2013-2022 / MK 2) This guide shows the procedure to dismantle the airbag switch and module on the second series Citroen C4 Grand Picasso. First, get into the vehicle a…
How to Repair the Handbrake Button on the Citroen C4 Grand Picasso
How to Repair the Handbrake Button on the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Follow this guide to repair the electronic handbrake button on the Citroen C4 Grand Picasso. First, get inside the vehicle and remove the plastic cov…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos