Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Air filter replacement for Citroen C3.

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: Air filter
Operation: Air filter replacement for Citroen C3.

To keep the engine of the Citroen C3 efficient, it is necessary to replace the air filter at the intervals established by the maintenance program, more often if we are driving on dusty roads. To do this, we open the hood of the engine compartment and begin by disconnecting the air intake pipe, disconnecting the manifold pipe and unscrewing the metal clamp. We can then remove the filter box, and proceed to unscrew the six screws that hold the cover using a star screwdriver. Once the cover is open, we remove the old filter, clean the inside and install a new filtering element, positioning the rubber edge well. We close the cover by tightening the six screws and remount the box in its seat, restoring the connections.


Posted on 3 June 2023 by ScegliAuto

    Frequently Asked Questions

    • C3 2009-2016 - Where is the air filter located in the Citroen C3? Read Answer
    • C3 2009-2016 - When to replace the air filter on Citroen C3? Read Answer
    • C3 2002-2009 - Why does the Citroen C3 not keep the minimum? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos