Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Ds5
    4. : How to perform a service reset on a Citroen DS5?

Citroen Ds5 - Video tutorial

Model: Citroen Ds5 MK 1 - Years 2011-2019
Part: Checks and maintenance
Operation: How to perform a service reset on a Citroen DS5?

Performing the service light reset on a Citroen DS5 (2011-2019) is a very simple and quick operation as shown in today's video tutorial, and we can do it completely independently and in a few seconds after changing the oil in our vehicle, but let's see the procedure now. Let's start by turning on the vehicle's instrument panel without starting the engine, then we press the button with the icon of the wrench followed by "000". At this point, we turn off the panel and press and hold the same previous button and then turn on the panel again. After doing this, a countdown of ten seconds will appear on the display, so we continue to hold down the button until the time expires to complete the reset.


Posted on 26 July 2023 by ScegliAuto

    Frequently Asked Questions

    • Ds5 2011-2019 - What does the Citroën DS5 Urea light indicate? Read Answer
    • Ds5 2011-2019 - What does the urea warning light indicate in the Citroà «n DS5? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos