Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Citroen C3?

Model: Citroen C3 SC - Years 2009-2016
Part: Service warning light

This tutorial explains how to reset the service light on a Citroen C3, a very simple and quick operation. Before doing this, ensure all scheduled maintenance tasks are completed. Start by entering the cabin, then insert the key but keep it in the initial position. Next, press and hold the button located to the right of the speedometer, turn on the ignition, and keep the button pressed for the duration of the countdown displayed. To check if the reset was successful, you can restart the ignition.

Updated on 21 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Citroen C3
How to reset the service light on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) The reset of the service light on the Citroen C3 vehicle follows the same procedure as resetting the light related to the maintenance of Peugeot vehi…
How to Reset the Service Light of the Citroën C3?
How to Reset the Service Light of the Citroën C3?
Citroen C3 (2009-2016 / SC) To reset the Service light of the Citroën C3, press and hold the button located at the bottom right of the speedometer. While holding it, turn the ke…
How to Reset the "Service" Light on a Citroen C3
How to Reset the "Service" Light on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) Before you begin, sit in the driver's seat of your Citroen C3. Start by pressing and holding the spanner-shaped button located below the multifunctio…

    Frequently Asked Questions

    • C3 2016-2023 - What does the illumination of the Service warning light mean in the Citroen C3? Read answer
    • C3 2002-2009 - How to reset the "Service" warning light on a Citroen C3? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos