Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the Citroen DS3

Model: Citroen Ds3 MK 1 - Years 2010-2019
Part: Door trim panel

Today's guide shows how to remove and replace the front door panel of the Citroen DS3, as well as the Citroen C3. First, open the front door and start unscrewing the fixing screws located on the side of the door panel; then remove the window switch panel and disconnect the electrical connector found underneath, as illustrated in the video. At this point, lever the sides to detach and remove the panel, disconnecting the handle cable; this will allow access to the speaker and window mechanism.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the dashboard components of the Citroen DS3
Disassembly of the dashboard components of the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) Below we will see the instructions that will allow us to disassemble the components of the Citroen DS3 dashboard. First, we climb aboard the vehicle …
Removing Door Panel Citroen DS3
Removing Door Panel Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) In today's video tutorial, you will see how to remove the front door panel of a Citroen DS3. First, open the door and unscrew the screws located at t…
How to Reset the Service Light on the Citroen DS3
How to Reset the Service Light on the Citroen DS3
Citroen Ds3 (2010-2019 / MK 1) Today, we will see in this short video how to reset the service light for the routine maintenance oil change on the Citroen DS3. First, get into the …

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos