Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Citroen C4 Picasso

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Battery

The following steps will show us how to disassemble and replace the battery of the Citroen C4 Picasso. First, we open the car's engine hood and start by disconnecting both battery terminals (positive and negative) using a wrench. Then, we unscrew the battery bracket screw located at the bottom of it, using a 10mm socket wrench with an extension, as shown in the video. At this point, we remove the battery from its compartment and replace it with a new one of the correct type and with the same amperage. Finally, we make the connection.


Posted on 30 October 2023 by ScegliAuto



Guide to replacing the battery of the Citroen C4 Grand Picasso
Citroen C4 Picasso (2006-2013 / MK 1) Today's guide will show us the main steps on how to dismantle and replace the battery of the Citroen C4 Grand Picasso and the C4 Picasso. First, we o
How to remove the battery of a Citroen C4 Picasso
Citroen C4 Picasso (2013-2022 / MK 2) Before starting, we will have to open the front hood of our Citroen C4 Picasso. Let's start by moving the cover of the positive pole connected to the
How do you replace the battery of the Citroën C4 Picasso?
Citroen C4 Picasso (2013-2022 / MK 2) To replace the battery of the Citroën C4 Picasso, you need to open the hood, so that you can access the components inside the engine compartment: in

Other guides that may interest you

    Frequently Asked Questions

    • C4 Picasso 2013-2022 - What does Active Energy Saving Mode mean on Citroen C4 Picasso? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos