Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Cactus
    4. : How do you reset the Service light on the Citroën C4 Cactus?

Citroen Cactus - Video tutorial

Model: Citroen Cactus MK 1 - Years 2014-2020
Part: Checks and maintenance
Operation: How do you reset the Service light on the Citroën C4 Cactus?

The operation to reset the Service light on the Citroën C4 Cactus is done by holding down the button located at the end of the lever on the left side of the steering wheel, while the instrument panel is off. While continuing to hold down this button, you will need to insert the ignition key and turn it to turn on the instrument panel: at this point, a countdown will appear on the display, at the end of which the Service light will be reset. Then you can release the button and turn off the instrument panel: to verify that the reset has occurred, simply turn on the instrument panel again.


Posted on 20 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Cactus 2014-2020 - What are the orange warning lights on the Citroën C4 Cactus? Read Answer
    • Cactus 2014-2020 - What are the warning lights on the Citroën C4 Cactus? Read Answer
    • Cactus 2014-2020 - What to do if the AdBlue warning light comes on in the Citroen C4 Cactus? Read Answer
    • Cactus 2014-2020 - When does the adblue warning light on the Citroen C4 Cactus come on? Read Answer
    • Cactus 2014-2020 - How much is the additional fluid tank of the Citroà «n C4 Cactus? Read Answer
    • Cactus 2014-2020 - What to do if the engine light comes on in the Citroen C4 Cactus? Read Answer
    • Cactus 2014-2020 - What to do in case of problems with the automatic transmission in the Citroen C4 Cactus? Read Answer
    • Cactus 2014-2020 - How to reset the "Service" light on a Citroen C4 Cactus? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos