Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Jumper
    4. : Where are the fuses located in the Citroën Jumper?

Citroen Jumper - Video tutorial

Model: Citroen Jumper MK 2 - Years 2006-2014
Part: Fuse box
Operation: Where are the fuses located in the Citroën Jumper?

All the fuses of the Citroën Jumper are contained inside the appropriate fuse box, which is installed in the vehicle: this is located in the lower left part of the dashboard, relative to the steering column, and will be accessible by removing the appropriate protective panel. Once the panel is removed, access to the fuse box will be available: it contains the fuses that are responsible for the operation of the low beam headlights, courtesy lights, cigarette lighter, etc. Each fuse can be replaced with a new spare part that has the same amperage.


Posted on 28 November 2023 by ScegliAuto



Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) The fuses of the Citroën Jumper are contained inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle, it will b
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2006-2014 / MK 2) On the Citroën Jumper, all fuses are located inside the appropriate fuse boxes that are installed on the vehicle: in this model, four can be identifi
Where are the fuses located in the Citroën Jumper?
Citroen Jumper (2014-2023 / MK 3) Inside the Citroën Jumper, all the fuses are divided into the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle there

Other guides that may interest you

    Frequently Asked Questions

    • Jumper 2006-2014 - Where are the fuses located in the Citroën Jumper? Read Answer
    • Jumper 2014-2023 - Where is the fuse box located in the Citroen Jumper? Read Answer
    • Jumper 2014-2023 - Where are the fuses of the Citroen Jumper located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos