Do it yourself
| ||||
|
Citroen C5 - Video tutorial
Model: Citroen C5
RD, X7, MK 2
- Years 2008-2017 Today's steps will show us the process of disassembling and replacing the glow plugs of the Citroen C5 2.0 HDI. First, we open the vehicle's engine hood and begin by removing the partition located behind the engine; we disconnect the electrical connector and the tubing located above the glow plugs, as shown in the video. At this point, we disconnect the connectors of the glow plugs and use a socket wrench with an extension to unscrew and remove them; we install the original glow plugs (with the same pitch), gently screwing them in and then tightening them with a wrench!
Posted on 18 December 2023 by ScegliAuto
Other guides that may interest you |
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.026
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |